Honda S2000 Oil Cap Wrench

I designed this oil cap wrench to help with the awkward location of the oil cap on the Honda S2000. This wrench sits almost flush with the valve cover and gives a good bit of leverage to help remove the cap, but doesn't allow a full grip on the tool and helps prevent over-tightening and damaging the oil cap if used in that manner. I printed with ABS to accommodate engine heat, but PLA may be fine for this application. I used 99 walls to make this completely solid, which is probably overkill, but I would rather it be too strong than not strong enough.

Please do not sell my design, this project was created to help myself and others in the community at no cost. My designs are not to be used for profit, so if you see my design for sale somewhere please let me know.