Electronic thermal switch mount Thermistor
Print Profile(1)
Description
Another print for the Campervan, I installed some fans on the van fridge to aid airflow and cooling in the hot weather. I fitted a thermal switch to turn them on when the temperature gets above 20 degrees.
These little switches are great, but unless you can cut a hole to recess them in, then the mounting options are extremely limited. I'd tried using double sided tape, which worked well unit it got warm then the switch would come lose and end up dangling by it's wires.
So I design this little screw mount. The hole on the right is to pass the thermal probe from the bottom back up to the top.
I made this from Petg
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)