Tagilla - Escape From Tarkov - Hueforge 200x200

STOP! IT'S HAMMER TIME!

Have you ever thought “Hey this guy has a hammer and I have a gun ez-pezy lemon squeezy riiiighhhht?” Only to find out that the man with the hammer is actually Thor gone grunge? Well my boys and girls, now you're in luck you can relive that moment in your head with this little friendly aide-memoire in a 200x200 styled hueforge. Remember HE CAN AND WILL TOUCH THIS! no matter how many times you or the gang of Texans you randomly found while playing and now play Tarkov with on Discord daily yell “Tagilla, relax, it's only a prank bro! I was just kidding!” 

Project: 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #434b2f PLA BambuLab Matte Dark Green  Transmission Distance: 0.2
    #ae835b PLA BambuLab Matte Caramel  Transmission Distance: 1.5
    #566078 PLA BambuLab Basic Blue Gray  Transmission Distance: 2.5
    #9d432c PLA BambuLab Basic Brown  Transmission Distance: 2
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 7 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #7 (0.64mm) swap to BambuLab Matte Dark Green
    At layer #9 (0.8mm) swap to BambuLab Matte Caramel
    At layer #10 (0.88mm) swap to BambuLab Basic Blue Gray
    At layer #13 (1.12mm) swap to BambuLab Matte Caramel
    At layer #14 (1.2mm) swap to BambuLab Basic Brown
    At layer #16 (1.36mm) swap to BambuLab Matte Caramel
    At layer #19 (1.6mm) swap to BambuLab Basic Red
    At layer #22 (1.84mm) swap to BambuLab Matte Ivory White for the rest.