Search models, users, collections, and posts
CR-10S Pro Gantry Back Light Bracket (universal)
IP Report
Print Profile(1)
0.24mm layer, 2 walls, 15% infill
Designer
35 min
1 plate
Open in Bambu Studio
Boost
0
0
0
0
0
0
Released
Description
This is a led strip bracket for the back of the gantry of a Creality CR-10S Pro. It is made to fit a 20x20 extrusion without trouble.
Just stick a led strip to the bottom, or 2 if you want to wire them in series, feed the cable to the side of the gantry and connect it to the board. I created an open channel to feed the cable from the middle to the side of the gantry to prevent the cable from interfering with the machine.
However, you can use this for anything to mount a led strip to a wall, extrusion, or something else. It is not only limited to this printer.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)