Voronoi Mushroom Lamp

A decorative mushroom lamp.

Each part was printed on a P1S 3d printer. All parts except the Lamp Kit Adapter were printed with 0% infill. The Lamp Kit Adapter was printed with 5% infill. The Mushroom Cap Bottom and Stem were printed with supports. You can use either a led light bulb, or the Remote Control RGB LED Lamp Kit 001 for Bambu Lab. If you wish to use the LED Lamp Kit, you will need to print the Lamp Kit Adapter. Here is a link to the cable I used for the light bulb. https://www.amazon.com/Electric-Waterproof-Temporary-Building-Lighting/dp/B0C6F3CC6J?pd_rd_w=NMWcB&content-id=amzn1.sym.28b8b5f8-6db0-430a-88ea-02298bfc79f4&pf_rd_p=28b8b5f8-6db0-430a-88ea-02298bfc79f4&pf_rd_r=1AVCGZ4091ZTJ1HHEKQK&pd_rd_wg=Eqhur&pd_rd_r=642118fb-3bb0-427b-86b1-3d8ece1277d5&pd_rd_i=B0C6F3CC6J&ref_=pd_bap_d_grid_rp_0_1_ec_pd_hp_d_atf_rp_4_i&th=1. Here is a link to the Remote Control RGB Lamp Kit I used. https://www.amazon.com/dp/B0F18V1LWH?ref=ppx_yo2ov_dt_b_fed_asin_title

Model made by ChrisTheViolaNerd @ https://www.printables.com/model/1466028-voronoi-mushroom-lamp/files