Unicorn horn for caps and hats

Ever wanted to be a unicorn? Now is your chance! 

I left enough space for 4 magnets (15x2mm) on each, the horn and the plate. I also added a pause so you can press them in and continue the print. 
 

I desinged the plate from scratch, the horn was taken from here.

I didnt have problems with a curled tip, because I printed 2 at the same time (longer cooling times). So grab some more magnets and a friend or just make it a spare horn. 

I obviously used AI to alter the face and background of my picture, but not on the model itself.