Jinx Keychain And Backpack Charm Easy Print

 ⚠️ PLEASE READ: For the best and most flawless result, please ONLY use my "Recommended Print Profile." Slicing the model with your own custom settings may cause support failures or fragile parts.

The craziest character from the League of Legends and Arcane universe, Jinx, is now ready for 3D printing! This model has been fully optimized and successfully test-printed on Bambu Lab printers.

🛠️ Printing Tips & Profile Details

• Profile Optimization: The shared print profile includes the most accurate tree support placement and layer settings. No extra adjustments are needed.
• Speed & Quality: Printing speeds are optimized within the profile to ensure smooth details and zero defects. Please do not increase the print speed.
• Bed Adhesion: Make sure your build plate is clean (free of grease and dust) before starting the print to avoid any first-layer issues.

🚀 Support & Share

Once your print is complete, I would highly appreciate it if you could Rate this model and share a Photo of your Make in the comments! Your ratings and photos are the best motivation for me to keep creating and uploading new models.

⚠️ CRITICAL POST-PROCESSING & SUPPORT REMOVAL GUIDE: To clean this model without breaking the delicate details and hair braids, please strictly follow the numbered guide in the photo above.   🛠️ RECOMMENDED TOOLS:  • A sharp hobby knife  • Fine-tip jewelry pliers    📌 STEP-BY-STEP INSTRUCTIONS: • Areas 1, 2, 3 & 4 (Hair Braids): Use your scalpel to micro-slice and shatter the tree supports under the hair sections first. Do NOT pull them directly. Carefully slice, then slowly remove the tiny pieces using your fine-tip pliers. • Areas 5 & 6 (Body Details): Gently twist and remove the supports from the body loops using your pliers.   🚫 CRITICAL WARNING - DO NOT USE HEAT GUN / HAIR DRYER: Never use a heat gun or hair dryer (fön makinesi) to clean up stringing or to loosen the supports. Since this model is small and detailed, the heat will warp or deform the thin hair braids instantly. Clean it 100% mechanically using your tools.