LED Tea Light Holder Logiker – Ira - Free 3D Print Model

Search models, users, collections, and posts

der_dennis3d

Household>Decor

IP Report

Print Profile(2)

All

P1S

H2D Pro

H2D

P1P

P2S

X2D

X1E

X1 Carbon

H2C

H2S

A2L

0.2mm layer, 2 walls, 5% infill

Designer

8.9 h

4 plates

4.8(43)

Multi-color single-plate printing

3.6 h

1 plate

Open in Bambu Studio

Boost

1441

4655

940

416

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

D37.2x36.6mm LED Flame Tea Light Candle Set

Description

Content has been automatically translated.

Show original

Membership

For those who want to sell prints – license available here

Join

LogiKer – Ira

Ira is a new variation in the LogiKer series. This time with a pattern inspired by fern leaves, which works with light much better than I originally expected

There is also an optional stand this time, shaped like a small branch. The stand can be printed either in a single color or in two colors, depending on what you prefer

The main body is printed with fuzzy skin, giving the surface a softer and more natural look. Together with the pattern, it fits the overall design much better than a completely smooth surface would

There is also an inlay again this time. I printed mine in green because I felt it fits the natural theme quite well. Depending on the filament or LED used, something completely different might work just as well or even better

The opening is adjusted so the tealight can now be removed and inserted comfortably without having to remove the handle every time. That was apparently a topic with the previous versions 😄

The holder itself is assembled by simply plugging the parts together. The stand, on the other hand, is printed as one complete piece

Note:
LED only
The branch may look fairly natural, but real fire would probably find the rest of the model just as interesting

Socials:

Instagram
YouTube

LogiKer – Ira

Ira is a new variation in the LogiKer series. This time with a pattern inspired by fern leaves, which works with light much better than I originally expected

Additionally, there is an optional stand again this time in the shape of a small branch. The stand can be printed in a single color or in two colors, depending on what you prefer

The main body is printed with fuzzy skin, which makes the surface appear somewhat softer and more natural. Especially together with the pattern, I think this fits much better than a completely smooth surface would

Additionally, there is an inlay again this time. I printed mine in green because I felt it fits the natural theme quite well. Depending on the filament or LED used, something completely different might work just as well or even better

The opening is adjusted this time so that the tealight can be comfortably removed and reinserted without having to remove the handle every time. That was certainly an issue with the previous versions 😄

The parts of the holder itself are simply plugged together. The stand, on the other hand, is printed as one complete piece

Note:
LED only
The branch may look fairly natural, but real fire would probably find that just as exciting as the rest of the model

Boost Me (for free)

If anyone would like to leave a boost, I would be very happy

tealight

tealight candle

tealight candle holder

tealight holder design

Comment & Rating (92)

@hermanwen

I tried print using p2s, however failed, the leaves steam is not strong. Try with different speed 50 ms but still failed, fan 100

The designer has replied

@hermanwen

There are 2 weak steam spots

@hermanwen

Replying to @hermanwen :

This position weak, others good

@Dennis_Brendel

Part 1 First of all, thank you for the images! They really help to narrow down the problem. And I’m very sorry to hear and see that it isn’t working as intended. The dimensions are 1 mm in width and 2 mm in thickness, so you are right that these are very delicate parts of the print and therefore a weak point. I’ve printed almost 15 of them so far on both my P1S and the H2C and never encountered this kind of issue. Just to be clear: I’m not saying that you are doing anything wrong or that this is your fault! I checked the file, and in Bambu Studio the geometry does not show anything unusual after slicing. So, to narrow the issue down a bit, here are a few questions:

@user_2795978836

Print Profile

0.2mm layer, 2 walls, 5% infill

I combined the stand with one of your other models. It turned out very nice

The profile uploader has replied

Show original

@Dennis_Brendel

It turned out very nice! Thank you for showing! The black of the stand looks very good, may I know what filament it is

Show original

@user_2795978836

Replying to @Dennis_Brendel :

This is Bambu Lab PLA Matte in black

(Edited)

Show original

@Dennis_Brendel

Replying to @user_2795978836 :

Vielen Dank!

@keni_927

Boosted

I have yet to print the stand but I love it even without it! I’ve printed two, the other is brown with a white diffuser. I’m considering printing them out for tables at my next church potluck.❤️

The designer has replied

@Dennis_Brendel

Oh wow, that looks really good thanks for sharing! What is a potluck?

@keni_927

Boosted

A potluck is a get together where everyone brings a dish (food, a casserole or side or dessert) and everyone eats the food together. You get to try a lot of different foods but you only make one.

@user_2449054877

Absolutely love these . Upside and added a solor light bulb to them.

The designer has replied

@Dennis_Brendel

Sorry for the late response! Looks absolutly awesome thanks for sharing!

@user_3675259944

Print Profile

0.2mm layer, 2 walls, 5% infill

Printed with PLA Wood filament. Came out really smooth and the supports came off nicely, won't take much sanding to finish it. Thanks for sharing this print.

The profile uploader has replied

@Dennis_Brendel

Thanks for taking the time to write a comment. Looks really good!

@user_1993510040

Print Profile

0.2mm layer, 2 walls, 5% infill

Beautiful gift for friends and family. I printed it in white and it looks really great with an electric tealight

The profile uploader has replied

Show original

@Dennis_Brendel

Wow! That lights up beautifully! Very well done, thank you very much for showing it

Show original

@Plotterfrau.ke

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill

Very nice file and perfect for my garden Printed without problems with the P1S. THANK YOU

The profile uploader has replied

Show original

@Dennis_Brendel

Thank you! I put so much effort into creating and printing a branch, and you're just hanging the lights on a real branch... :D (Just kidding!!!) It looks absolutely amazing! Thanks for the boost too

Show original

@MommaC

loved the print. came out amazing

The designer has replied

@Dennis_Brendel

Looks great! Thank you very much!

@Blackwolf1

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill

This is a really great project and turned amazing! I used luminous green pla for the candle pillar and a blue colored tea light. Highly recommend!

The profile uploader has replied

@Dennis_Brendel

Looks awesome! Thanks for sharing and of course thank you for the Boost!

@user_2530068452

Boosted

Worked wonderfully. Made for my wife and already had requests from our friends.

The designer has replied

@Dennis_Brendel

Hi Alan, I am happy to hear that you like the design! Keep the printer going :D

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.