Against the Current Future: Cherry Blossom's Sorrow

This is a 1:1 prop replica model of the melee weapon 'Cherry Blossom's Sorrow' from 'Against the Current Future', and it is the second weapon I have completed.
It is approximately 1.1 meters long, reproducing the crystal texture of the blade, cherry blossom elements, and handle decorations. It supports the addition of LED strips to achieve a self-luminous effect, making it a cosplay prop that is both playable and displayable

Printing tips:

A1 and A1 mini. Requires bed adhesive spray [MUST spray] or low-temperature printing plate
1. The model is relatively tall, so before printing, spray adhesive on the print bed to prevent it from wobbling and collapsing, causing spaghetti [Don't argue, I've had 4 plates of spaghetti, each taking 6 hours]
2. It comes with support structures; if you have the ability, you can optimize the support points to improve the finished details
3. Color separation has been done, so you can print in multiple colors directly with AMS; without AMS, you can manually paint after printing

Additional accessories

Assembly accessories:
- M3*20 screws × 6
- Heat-set inserts × 4 (can also be secured directly with glue)
- Hot melt adhesive / model glue (some structures require gluing for reinforcement)

- Lighting modification: Space for LED strips and battery compartment has been reserved, allowing for the installation of 12V COB LED strips + 18650 battery pack for self-illumination, creating a fully immersive ambiance in the finished product.

=====

In the future, I will prioritize making some small models/scaled models. 1:1 weapon props have a long production cycle and the finished products take up more space, so updates will be slower. If there are any weapons you particularly want a 1:1 replica of, you can leave a comment in the comments section. I will consider whether to create the corresponding 1:1 version based on everyone's requests and feasibility of production.