Mid-Century Modern Birdhouse & Succulent Planter

As my next installment of birdhouse, I thought I'd go with a modern mid-century look and incorporate planters into it!

Print it! It's neat!

Printing Instructions:

Included are two versions of the roof. One without a planter and one without. The option with the planter does require supports.

When placing this outside I recommend using materials such as PETG, ASA/ABS, or Polymaker's HT-PLA.

Feel free to scale up if you feel it needs to be bigger. The clearances should be just fine.

While the 3mf files provided indicate that you need a multi-color system to print the rock wall, it will still look fantastic in a single color.

• Layer height: 0.2mm
• Supports: The optional roof that incorporates a planter on top does require supports
• Wall loops: Recommended 4-5 wall loops when printing with lighter color filaments. Everything else will do fine with 2-3 wall loops

Assembly:

Please refer to the provided assembly guide for instructions

Filaments I used:

• Polymaker Matte Black PLA
• Push Plastic Desert Tan PLA
• Bambu Lab White PLA Basic
• Bambu Lab Ash Gray Matte PLA
• Bambu Lab Nardo Gray Matte PLA
• Bambu Lab Dark Chocolate Matte PLA
• Bambu Lab Cocoa Brown PLA Basic

For those who have joined my commercial membership on Patreon, prints of this model can be used for commercial purposes.

Feel free to join my discord for additional support, questions, or suggestions!