cantstopprinting

cover

1779003203945.jpg

1779003203916.jpg

1779003203854.jpg

1779003203787.jpg

1779003203822.jpg

1779003203754.jpg

1779003203723.jpg

1779003203655.jpg

1779003203689.jpg

1779003203886.jpg

makerlab

plate_1.png

111d25c091503cd6.jpg

<h3><strong>Material</strong></h3><ul><li>PLA / Marble PLA / Matte PLA</li><li>Sandstone, ash stone, ivory, or weathered grey tones work especially well for this sculpt</li></ul><h3><strong>Printer Setup</strong></h3><ul><li><strong>Bambu P1S — Standard 0.4 Nozzle</strong></li><li>Built around standard P1S profile behaviour with support tuning adjustments</li></ul><h3><strong>Layer Height</strong></h3><ul><li><strong>Adaptive Layer Height ON</strong><ul><li>Range: <strong>0.08 – 0.24 mm</strong></li></ul></li></ul><p>Important for:</p><ul><li>engraved surface transitions</li><li>smoother halo curves</li><li>layered wing geometry</li></ul><h2><strong>Supports</strong></h2><h3><strong>ON — Required (Heavy Support Model)</strong></h3><p>Main support zones:</p><ul><li>halo arch structure</li><li>hourglass interior areas</li><li>inner wings</li><li>robe overhang transitions</li></ul><p>This is one of the more advanced S2 prints.</p><h2>🔧 <strong>Key Support Settings</strong></h2><h3><strong>Top Z Distance</strong></h3><ul><li><strong>0.265 mm</strong></li></ul><p>Helps:</p><ul><li>cleaner support release</li><li>less surface tearing</li><li>easier cleanup around the halo + hourglass</li></ul><h3><strong>Top Interface Layers</strong></h3><ul><li><strong>4</strong></li></ul><p>Recommended for:</p><ul><li>smoother support contact surfaces</li><li>cleaner underside finish</li><li>preserving engraved geometry during removal</li></ul><h3><strong>Support Density</strong></h3><ul><li><strong>12–15%</strong></li></ul><h3><strong>Support Style</strong></h3><ul><li>Default / Snug</li></ul><h3><strong>Overhang Threshold</strong></h3><ul><li><strong>45°</strong></li></ul><h3><strong>Support Modifiers</strong></h3><p>Additional support modifiers already added in key failure areas after test prints.</p><h2>🛠️ <strong>Support Removal Tips</strong></h2><ul><li>Remove supports slowly from outer sections inward</li><li>Be careful around:<ul><li>halo arches</li><li>hourglass frame</li><li>inner wing edges</li></ul></li></ul><p>Avoid twisting the central hourglass structure during cleanup.</p><h2><strong>Infill</strong></h2><ul><li><strong>12–15% Gyroid</strong></li></ul><p>Good balance between:</p><ul><li>weight</li><li>print time</li><li>structural stability</li></ul><h2><strong>Walls &amp; Layers</strong></h2><ul><li>Walls: <strong>3</strong></li><li>Top Layers: <strong>4–5</strong></li><li>Bottom Layers: <strong>4</strong></li></ul><h2><strong>Speed Notes</strong></h2><p>Standard P1S speeds work fine overall.</p><p>Optional:</p><ul><li>slightly slower outer wall speed around:<ul><li>face</li><li>hourglass geometry</li><li>halo structure</li></ul></li></ul><p>Helps sharpen edges and engraved detail.</p><h2><strong>Cooling</strong></h2><ul><li>Default cooling</li><li>100% fan after initial layers</li></ul><h2><strong>Bed Adhesion</strong></h2><ul><li>Textured PEI recommended</li><li>No brim normally required</li></ul><h2><strong>Final Note</strong></h2><p>Cassiel is intentionally heavier and more architectural than the rest of Series II.</p><p>Supports are part of achieving the deeper layered geometry and integrated hourglass structure.</p><p>Take your time on cleanup — the final result is worth it 👍</p><p>&nbsp;</p>

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>The final angel of Series II.</p><p>&nbsp;</p><p>Cassiel was designed to feel different from the rest immediately — quieter, heavier, more ancient.</p><p>&nbsp;</p><p>Less “divine warrior”</p><p><br>more celestial monument.</p><p>&nbsp;</p><p>&nbsp;</p><p>The integrated hourglass became the core of the entire sculpt direction. Instead of holding an object, the figure is built around it — like time itself is part of the structure.</p><p>This one leans hardest into:</p><ul><li>stillness</li><li>inevitability</li><li>ancient stone architecture</li><li>silent presence</li></ul><p>Compared to the rest of S2:</p><ul><li>the wings are longer and more monolithic</li><li>the geometry is calmer and heavier</li><li>the pose is intentionally motionless</li></ul><p>Wanted the final piece of the Greater Heavenly Court to feel less alive… and more eternal.</p><p>&nbsp;</p><p>&nbsp;</p><h2><strong>⚠️ Print Notes</strong></h2><p>This is one of the larger and more support-heavy S2 models.</p><p>Main attention areas:</p><ul><li>halo arch structure</li><li>inner wing edges</li><li>hourglass support zones</li><li>robe interior cleanup</li></ul><p>Support modifiers were added after testing to help preserve the geometry.</p><p>&nbsp;</p><h2><strong>🛠️ Support Removal Tips</strong></h2><ul><li>Take your time around the halo sections</li><li>Remove supports gradually from the outer wings inward</li><li>Avoid twisting the hourglass frame during cleanup</li></ul><p>The hands were intentionally simplified and reinforced for cleaner image-to-3D conversion and stronger final printing.</p><p>&nbsp;</p><h2><strong>💡 Series II Direction</strong></h2><p>Series II was built around giving every angel:</p><ul><li>a unique silhouette</li><li>unique symbolism</li><li>different emotional tone</li><li> </li></ul><p>The final lineup became:</p><ul><li>Metatron → knowledge</li><li>Sandalphon → resonance</li><li>Raguel → balance</li><li>Raziel → secrets</li><li>Remiel → transition</li><li>Saraqael → observation</li><li>Cassiel → time / inevitability</li></ul><p>Cassiel closes the court.</p><p>&nbsp;</p><h2><strong>📐 Print Settings (Quick)</strong></h2><p><strong>0.4 nozzle print</strong></p><ul><li>12–15% infill</li><li>Adaptive layer height ON</li><li>Supports ON</li><li>Recommended Top Z Distance: 0.265</li><li>Top interface layers 4</li></ul><h2><strong>📸 Final Thoughts</strong></h2><p>This one honestly came out closer to a carved monument than a normal statue.</p><p>Looks especially good in:</p><ul><li>sandstone PLA</li><li>marble PLA</li><li>matte stone colours</li><li> </li></ul><p>Probably the most atmospheric piece in the entire S2 lineup.</p><p>&nbsp;</p><p>&nbsp;</p><h2><strong>👉 </strong></h2><p>The Greater Heavenly Court is complete.</p><p>If you’ve been building the full S2 lineup…<br>Cassiel is the final piece.</p><p>Would love to see the entire court printed together 👇</p>

CASSIEL — THE SILENT WATCHER ANGEL OF TIME 

ASIA

Print Profile(1)

Description

⚠️ Print Notes

🛠️ Support Removal Tips

💡 Series II Direction

📐 Print Settings (Quick)

📸 Final Thoughts

👉

Comment & Rating (0)

License

Related Models