Bambu H2 Filament Track Switch Mount Lite & Heavy

Bambu H2 Filament Track Switch Mount Lite & Heavy

This is my take on mounting the filament track switch onto the rear panel of the Bambu H2 Machine. I designed this one because the original would not allow me to open the poop chute cover I have installed. It mounts the track switch a little bit higher but remains out of the way of other accessories and PTFE tubes.

It mounts using the OEM screws that came with the filament track switch and uses the same mounting points on the rear panel.

The Lite model works great but I have also included the Heavy model for those who desire a bit more rigidity. Plate 1 is the Lite and plate 2 is the Heavy. The displayed time on the print profile adds both of the print times together so ignore that and click the profile to see actual print time.

Both models are quick prints! Ranging between 20-30 minutes if using a quick filament and 40-50 minutes if using a slow filament. Enjoy!

UPDATE: I’m opening up the license to allow remixing. I don’t really have the time to do updates to the model such as adding 4-1 mounts or ptfe tube supports so I’ll let you guys do what you want. Please follow the remix rules and make sure attribution is given. Step files are located in the raw files/stl section. Thanks!