Universal Tube Squeezer for Mustard, Mayo & Tomato

This tube squeezer is a simple and practical tool for getting more out of soft tubes.

Now included in 2 versions:

• Standard version – the original, thicker design
• Light version – a slimmer, more filament-saving version

Both versions work the same way: insert the end of the tube into the slot and roll the tool forward to push the contents toward the cap with less waste.

The slot is 67 mm wide, so it is suitable for tubes up to about 66 mm in width.

It works well with many common tubes, such as:

• Mustard
• Tomato paste
• Mayonnaise
• Creams
• Pastes
• Other soft household tubes

Which version should you choose?

• Choose the Standard version if you prefer the original, more solid design
• Choose the Light version if you want to save filament and print a slimmer version

Why I made it:

I wanted an easy way to empty tubes more efficiently instead of throwing away product that was still inside.

Print info:

• Standard version print time: about 29 minutes
• Light version print time: about 14 minutes
• Standard version material usage: about 20.2 g
• Light version material usage: about 9.3 g

Printing notes:

• Tested with a 0.4 mm nozzle
• Tested at 0.2 mm layer height
• Tested with PLA and PETG
• PETG is recommended for better durability

Notes:

- Best suited for soft tubes
- Reusable and easy to clean
- Simple design for practical everyday use

If you print one, I would really appreciate a like, rating, or photo of your print.