Samsung Freestyle Foldable Stand

Easy assembly of the parts. The pin model must be duplicated as it functions as a hinge on both sides of the flap. The model includes a small recess for those who want to glue in 2 small magnets to keep the flap closed. I have linked magnets below. However, it also stays closed without magnets; simply see and test it for yourself. I used 5 perimeters, the layers can be seen in the picture. The pins must be pressed in, like an interference fit, so gluing is not necessary, but before pressing them in, sand the pins a little again, as the seam might protrude slightly. Also, briefly run a round file into the holes for the flap. I designed the flap so that it has an opening angle of about 85° without weight; when the projector is placed on it, the flap will be at a 90° angle.