Print Elegance

cover

20260418_182110.jpg

plate_1.png

8f056354373498c8.jpg

0.15mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>Platzsparende und stabile Wandhalterung für die originale Xbox 360 Arcade / Fat Version.<br>Das Design nutzt ein Wabenmuster für geringeres Gewicht bei gleichzeitig hoher Stabilität.</p><h2>Features</h2><ul><li>Passend für die originale Xbox 360 Arcade / Fat</li><li>Leichtes Waben-Design</li><li>Einfach zu drucken</li><li>Leicht entfernbare Stützstrukturen</li><li>Sichere Wandmontage</li><li>Freier Zugang zu Kabeln und Anschlüssen</li></ul><h2>Druckempfehlung</h2><ul><li>PLA funktioniert problemlos</li><li>Empfohlen wird PETG für höhere Stabilität und bessere Hitzebeständigkeit</li></ul><h3>Empfohlene Druckeinstellungen</h3><ul><li>0,2 mm Schichthöhe</li><li>3–4 Wände</li><li>15–20 % Infill</li><li>Stützen nur bei Bedarf</li></ul><h2>Montage</h2><p>Für die Befestigung werden nur benötigt:</p><ul><li>2x M4 Senkkopfschrauben</li><li>2x Dübel</li></ul>

<p>Space-saving and stable wall mount for the original Xbox 360 Arcade / Fat version.<br>The design uses a honeycomb pattern for lower weight while maintaining high stability.</p><h2>Features</h2><ul><li>Suitable for the original Xbox 360 Arcade / Fat</li><li>Lightweight honeycomb design</li><li>Easy to print</li><li>Easily removable support structures</li><li>Secure wall mounting</li><li>Free access to cables and ports</li></ul><h2>Print Recommendation</h2><ul><li>PLA works without problems</li><li>PETG is recommended for higher stability and better heat resistance</li></ul><h3>Recommended Print Settings</h3><ul><li>0.2 mm layer height</li><li>3–4 walls</li><li>15–20 % infill</li><li>Supports only if needed</li></ul><h2>Assembly</h2><p>Only the following are needed for mounting:</p><ul><li>2x M4 countersunk screws</li><li>2x wall plugs</li></ul>

Print Profile(1)

Description

Features

Print Recommendation

Recommended Print Settings

Assembly

Comment & Rating (0)

License

Related Models

Xbox 360 Arcade Wall Mount