Yitao SHT45 Temperature and Humidity Meter 60° Angled Stand
Print Profile(2)
Description
A desktop/wall mount bracket designed specifically by me for the Yitao SHT45 digital temperature and humidity sensor module enclosure Thermometer enclosure link:
There is a magnet hole on the back A magnet with a diameter of 4mm and a thickness of 1.5mm is recommended for installation if not available, a 2mm thick one is also acceptable it uses an interference fit so no super glue is needed just press it in with a hard object this way, when the thermohygrometer is inserted, it will be directly held by the magnet, preventing it from falling
When in use, after installing the magnet, it can also be mounted reversed adhered under a monitor or other objects (note that monitor heat may affect temperature) the angle will be facing upwards the ventilation holes on the side of the bracket and the thermohygrometer's ventilation holes remain connected there are various placement options there will always be one that suits you download and print it now if you have any questions, feel free to leave a comment
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)