Large Scale Harbor Lighthouse Decor

Decorative lighthouse for your home. It could look great in your garden near a pond.

The lighthouse is about 50 cm tall when fully assembled. The parts connect together with the printed pins and needs gluing together.

The bottom has a cutout where cable for a lamp can go thru.

Mine was printed in ASA and PETG Translucent. It was my 1st ever print with ASA and had many failed attempts. I recommend a well dried roll for it, use of glue on the plate and a well heated chamber.

For easier print PETG might be a better alternative instead of ASA.

For the light I have used a bulb with E27 socket, the inner hole for it is around 10 cm in diameter.