Emberveil [Framed] - Bookmark

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

Emberveil [Framed] 🐉🔥📖

Step into a darker fantasy mood with Emberveil [Framed], a bold new addition to my framed bookmark series. This design features a fierce dragon surrounded by flowing ember shapes, roses and swirling details, all enclosed in a clean framed silhouette that gives it a polished, collectible look.

The contrast between the dark dragon, glowing eye, and rich red and pink tones gives this bookmark a dramatic presence while still feeling elegant. It is the kind of piece that stands out beautifully inside a book, but also feels like a tiny artwork on its own.
 

A little personal touch for this one, the name “Emberveil” was actually my girlfriend’s idea, and I think it fits the design perfectly 💛
 

✨ Features:

• Framed dragon bookmark design with a strong fantasy look
• Rich flowing details that create a fiery, atmospheric feel
• Bold contrast that makes the dragon really stand out
• Tassel hole at the top for an extra elegant finish
• Great for fantasy readers, dragon lovers, and collectors of artistic bookmarks

Maker notes:

• While the included profiles are carefully optimized for a 0.4 mm nozzle to retain detail across different settings, this model is still best printed with a 0.2 mm nozzle for the sharpest ribs, phalanges, and frame curls 🧩🖨️

   

• Make sure to clean the build plate with dishwashing soap and warm water before printing. Handwashing soaps should never be used to clean build plates because moisturizers can harm adhesion 🧼💧

   

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA eSun Fire Engine Red Transmission Distance: 2.9
PLA KINGROON Black Transmission Distance: 0.4 / Amazon
PLA 3D Jake Eco PLA Brown (New) Transmission Distance: 0.1
PLA BambuLab Hot Pink Transmission Distance: 3.6
PLA BambuLab Sunflower Yellow Transmission Distance: 4

Color Pellete 5 COLOR Version[Plate1]:

Swap Instructions 5 COLOR Version[Plate1]:

Start with Fire Engine Red
    At layer #5 (0.49mm) swap to Black
    At layer #8 (0.73mm) swap to Brown (New)
    At layer #9 (0.81mm) swap to Fire Engine Red
    At layer #13 (1.13mm) swap to Hot Pink
    At layer #19 (1.61mm) swap to Sunflower Yellow for the rest.

Color Pellete 4 COLOR Version[Plate2]:


Swap Instructions 4 COLOR Version[Plate2]:
Start with Fire Engine Red
    At layer #5 (0.49mm) swap to Black
    At layer #8 (0.73mm) swap to Brown (New)
    At layer #9 (0.81mm) swap to Fire Engine Red
    At layer #14 (1.21mm) swap to Hot Pink for the rest.

How to do more than 4 colors on a single AMS?

To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges.

Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS:

Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4
Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again!

This will allow you to Change the rolls of filament once the printer is done with that color.
For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need!
YOU CAN PLACE A PAUSE ON THE LAST LAYER OF COLOR 4 TO AVOID HAVING TO BABYSIT THE PRINTER. ONCE PAUSED CHANGE 1-2-3 WITH 5-6-7 AND RESUME. IF YOU NEED MULTIPLE PAUSES YOU CAN DO THAT TOO

Drop me a follow!🤜🤛