Printing_in_progress

cover

photoA.jpeg

photoB.jpeg

photoC.jpeg

boule-a-facette-v1.gif

photoD.jpeg

plate_1.png

dcc57c72a5645624.gif

0.08mm layer, 2 walls, 10% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees.
Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms.
You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.

This work is licensed under a Standard Digital File License – Community Use (SDFL‑C).

<h2>Disco Ball pour Platine Vinyle 🪩</h2><p>J’ai conçu cette petite boule à facette spécialement pour être utilisée sur une platine vinyle.</p><p>La sphère est composée de <strong>165 facettes de 5 × 5 mm</strong>.<br>Pour le rendu miroir, j’ai acheté des petits miroirs adhésifs sur AliExpress puis je les ai collés un par un sur chaque face. </p><p>&nbsp;</p><h2>Rendu &amp; utilisation</h2><p>Ma platine possède une petite lampe intégrée qui éclaire directement la boule pendant la lecture.<br>Je m’attendais à obtenir de vraies projections lumineuses sur les murs, mais au final l’effet reste assez discret.</p><p>Même sans ça, le rendu est vraiment sympa en situation : la boule tourne avec le disque et apporte une ambiance très cool pendant l’écoute.</p><h2>Impression 3D</h2><p>Je recommande :</p><ul><li><strong>Hauteur de couche : 0.08 mm</strong></li><li>Supports : arborescent</li><li>Orientation : sphère vers le haut, naturellement</li></ul><p>Le 0.08 mm permet surtout d’obtenir des facettes plus propres et facilite énormément le collage des miroirs.<br>Cela dit, une hauteur de couche plus élevée devrait aussi fonctionner correctement si vous voulez imprimer plus vite.</p><h2>Compatibilité</h2><p>Le trou central fait <strong>7 mm de diamètre et un centimètre de profondeur</strong>, ce qui fonctionne bien sur ma platine.</p>

<h2>Disco Ball for Turntable 🪩</h2><p>I designed this small disco ball specifically for use on a turntable.</p><p>The sphere is made up of <strong>165 facets of 5 × 5 mm</strong>.<br>For the mirror effect, I bought small adhesive mirrors on AliExpress and then glued them one by one onto each face. </p><p>&nbsp;</p><h2>Result &amp; Use</h2><p>My turntable has a small integrated lamp that illuminates the ball directly during playback.<br>I expected to get real light projections on the walls, but in the end, the effect remains quite subtle.</p><p>Even without that, the result is really nice in situ: the ball spins with the record and brings a very cool ambiance during listening.</p><h2>3D Printing</h2><p>I recommend:</p><ul><li><strong>Layer height: 0.08 mm</strong></li><li>Supports: tree</li><li>Orientation: sphere upwards, naturally</li></ul><p>The 0.08 mm primarily allows for cleaner facets and greatly facilitates mirror gluing.<br>That said, a higher layer height should also work correctly if you want to print faster.</p><h2>Compatibility</h2><p>The central hole is <strong>7 mm in diameter and one centimeter deep</strong>, which works well on my turntable.</p>

Disco ball for turntable

ASIA

Print Profile(1)

Description

Disco Ball for Turntable 🪩

Result & Use

3D Printing

Compatibility

Comment & Rating (1)

License

Related Models