Lilith - Hueforge
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160.06x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.03899mm
#000000 PLA Sunlu schwarz Transmission Distance: 0.1
#91202b PLA eSUN Fire Engine Red Transmission Distance: 3.3
#ffe5b4 PLA Creality Peach Fuzzy Transmission Distance: 4.8
#ffffff PLA BambuLab Jade white Transmission Distance: 5.8
This print uses 4 unique filaments
Swap Instructions:
Start with schwarz
At layer #4 (0.4mm) swap to Fire Engine Red
At layer #5 (0.48mm) swap to Peach Fuzzy
At layer #9 (0.8mm) swap to Jade white for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)