Wi-Fi 2.4GHz Yagi 416 Antenna Enclosure

This enclosure is designed for the 2.4GHz Wi-Fi Yagi 416 PCB directional antenna.
The project provides a compact and practical housing solution suitable for both indoor and semi-outdoor installations.

The mounting bracket allows both vertical and horizontal angle adjustment, making it easy to precisely aim the antenna for the best signal performance.

The PCB antenna is mounted inside the enclosure without screws.
Simply insert the PCB into the dedicated guide slots located in the cover section. For improved weather resistance, it is recommended to seal the SMA connector area and the enclosure contact edges using sanitary silicone before final assembly. The enclosure is then closed and secured together with the mounting bracket using two plastic screws.

The enclosure is partially weather resistant and designed with practical outdoor use in mind. Two small ventilation/drain holes located at the bottom help remove moisture and allow any condensed water to escape, reducing the risk of humidity buildup inside the enclosure.

Main features:

• Designed for 2.4GHz Wi-Fi Yagi 416 PCB antennas
• Screwless PCB mounting system
• Vertical and horizontal adjustment
• Compact and clean design
• Semi-outdoor/weather-resistant construction
• Drain/ventilation holes for moisture protection
• Simple assembly with minimal hardware required

Recommended materials:

• PETG for general outdoor use
• ASA/ABS for maximum UV and temperature resistance

Perfect for DIY Wi-Fi projects, OpenWRT setups, directional links, and custom wireless installations.