Nº18 Hueforge Dragon Ball
Print Profile(1)
Description
Project: n18.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 189.99x339mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.08mm and the Actual Thickness is 1.84mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
#e11021 PLA Copymaster 3D TURBO Red Transmission Distance: 4.1
This print uses 4 unique filaments
Swap Instructions:
Start with BambuLab Basic Black
At layer #7 (0.72mm) swap to BambuLab Basic Blue Gray
At layer #13 (1.2mm) swap to BambuLab Matte Ivory White
At layer #17 (1.52mm) swap to BambuLab Basic Black
At layer #18 (1.6mm) swap to Copymaster 3D TURBO Red for the rest.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)