Dispenser/Vending machine
Print Profile(1)
Description
Sleek vending machine V1.0
This machine is sleek and simple, consisting of only four parts this machine is ready to go right off the print bed.
for the pods used in the machine I personally used the 30mm pods scaled to 95% made by saltpetre (link below)
Assembly
Assembly is very straightforward simply keep note of the part numbers in the picture below.
1.
take part three and force the nub on part one into the center hole in part three
the clearance is incredibly tight so once it is on spin it around for a few seconds to make it looser.
2.
Align the three nubs with the three indents on parts one and two. This is where you may want to apply glue if you want it secure however it will still work without. The model should now look mostly complete.
3.
You may now enjoy the vending machine by putting pods inside and using piece four to seal them in.
Boost Me (for free)
pls boost?
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)