The Peaky Joker Blinders

The Peaky Joker

His gaze stares deep into your soul while he stands there silent smoking a cigarette and holding his Luger before breaking out into a psychotic laugh that only send chills down your spine quicker. The smoke in the air and the dim lights create a scene from your worst fears.

This is another twist on the iconic villain. Dressed to kill hes a sharp shooting gangster with psychotic tendencies. This design transports the iconic and dark style of 1920s Birmingham into the equally iconic and dark universe of Gotham.

This fan art model reimagines the timeless villain with a "Peaky" aesthetic: three-piece suits, heavy tweed overcoats, caps with hidden razor blades, and that relentless attitude of those who dominate the city's betting and crime scene. 

There are three print profiles provided. One is a completely NO AMS design, which requires you only to mark the white eye balls with a marker to create the pupils. Although missing two of the finer details, it is no less deserving of a print. 

However, I have included a second print profile which the AMS is only needed for the eye balls and cigarette. Everything else is a complete NO AMS design. For full effect I wanted to give you the option of having that lit cigarette with a head of ash and the deep stare of his green eyes.

The third print profile is for those who have a multi nozzle printer and can use the AMS with little waste, therefore this profile is still a multipart model but key parts are connected for ease of printing with an AMS. Waistcoat and buttons, legs and boots, hands (holding items) and the head are AMS designs taking no more than 4 colours for the head. 

This awesome figure stands a whopping 30cm tall - all three profiles at 300% is equal to 30cm. IF you wish to print him smaller then I would highly recommend using the AMS profile as the eyes are already small at 300%. 

Assembly – Recommended Method on multipart models

• Dry fit: Assemble all parts without glue to check alignment and fit.
• Cleanup: Lightly deburr edges and pegs where nessesary with a file/modeling tool to ensure uniform contact. All parts are tested and fit together.
• Optimal fix: Use glue for permanent assembly.
• Small Parts can require tweasers for ease of assembley.

📌 Recommended printing settings:

• Material: PLA
• Layer height: 0.16 mm (High Detail)
• Infill: 15%
• Nozzle: 0.4mm

supports where nessesary - I have tried to make it so all have a surface contacting the plate however due to the detail and complexity of the modeling they sometimes require alot of support, so be aware and be carefull during support removal. Use a naked flame gentley and for short intervals to clean surfaces after removal. 

NOT AI, NO AI COLOUR PICS WHICH DISGUISE A POOR DETAILED SINGLE COLOUR PRINT. REAL PRINTED RESULTS!

MOST OF MY MODELS ARE FAN ART RECREATIONS AND ARE FOR PERSONAL USE ONLY  : MY MODELS ARE UNOFFICIAL FAN ART AND ARE NOT AFFILIATED OR ENDORSED BY THIRD PARTY IP HOLDERS

Thankyou to everyone who has rated and boosted my prints, if you like the models and want to continue to support the creation of more please consider boosting, it really does help incentivise the creation of more models for makerworld. 

If you would like to "buy me a coffee" to support the continued creation of fun prints you can do so here;

All of my models posted here are free for you to use commercially for free. I make them as a hobby and a bit of fun, with the points helping supply filament and consumables. All i ask if you wish to support my designs and want to sell them is that you are aware of the IP infringement which apply to some of the models and take appropriate responsibility. Please also boost them as much as you can and help with the points and please correctly attribute the model design to this page in your descriptions etc - Thankyou again everyone!