P2S / X2D cabinet base hole covers
Print Profile(2)
Bill of Materials
Description
Hi
These are P2S and X2D cabinet base hole covers.
Covers help to keep your printer cleaner. Preventing filament pieces and other things falling down from the holes.
Print profile has two small covers for older P2S. When printing for newer P2S (like in the picture) one small cover will be left over.
Keep it just in case, throw it in the trash or remove it from the print profile before printing.
NB! Be careful with removing the covers from the build plate. They can fly away or the edge can brake when handling roughly (speaking from experience). Cover thickness is only 0.5mm.
I recommend using PETG or something with good heat resistance. Pla will go softer while printing other things. But because it is on the bottom of the printer it should not be a big issue.
Boost Me (for free)
Thank you for supporting me!
It means a lot and makes my day.
Please please rate my print profiles after printing. It is very helpful.
It determines the visibility of my models and the reward points awarded to creator.
Please don´t add your print profiles to my published models without my permission!
It will ensure that posted print profiles are up to standart under my models.
Thank you for understanding.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (35)