Holland Class Offshore Patrol Vessel 1:350

The Holland-class offshore patrol vessel is a modern patrol ship of the Royal Netherlands Navy, designed for long-range surveillance, maritime security, and low-intensity operations.

This 1:350 scale model captures the clean and stealth-inspired design of the Holland class, featuring its distinctive superstructure and spacious aft mission deck.

The model is optimized for being printed with only one section. That means you can print the upper hull as just one part and the lower hull as one part, so that you dont have a intersection at midships.

Printing recommendations

Use max. 0.16 mm layer height on a 0.4 mm nozzle or smaller.

Support is required for most superstructure parts.
Label and base plate can be printed without support.

Socket and base plate may be printed at a higher layer height, for example 0.24 mm.

Some parts may require 0.12mm layer hight max.

Hull parts may be too large for smaller printers.

Assembly

Assembly needs to be done with glue – think of it as a classic model kit 🙂

Please take a look at the pictures to see the correct positions of each part.

Filaments used:

• Light grey = Geeetech Grey PETG
• Dark grey = Sunlu Grey PETG Mate
• Black = Sunlu Black PETG Mate
• Red = Sunlu Red PETG (Used Red PLA becaus I ran out of red PETG)
• White = Sunlu White PETG
• Wood Base = Creality CR-Wood PLA
• Gold = Eryone Gold PLA