Kia Addgear PV5 Worx WX030 vacuum holder

A Kia Addgear holder for the Worx WX030 Vacuum.
This makes the vacuum very accessible from the boot of the PV5.

For this part you will need to also print two(2) pcs of the 37mm version of the keyed mounts found here: https://makerworld.com/en/models/2799473-kia-addgear-pv5-keyed-mounts#profileId-3114116 

You will need to use two(2) standard PC fan screws to secure the holder to the keyed mounts: https://amzn.to/41XmzL9

The Worx WX030 Vacuum: https://amzn.to/3RbP6dO

Combine this with some of my other designs fx. the Worx WA3869 Dual charger: https://makerworld.com/en/models/2799600-kia-addgear-pv5-worx-wa3869-charger-holder#profileId-3114279 
 

For this part which will be mounted against the dark blue plastic sides I suggest using a midnight blue PETG like this one: https://amzn.to/4nvr2Pl

I used a black PETG as I did not yet have the midnight blue, for reference for the picture.
 

Obviously I cannot and will not take any responsibility for any danger caused by the use of this part.