Search models, users, collections, and posts
Support hub AMS A1 static and inverted
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
58 min
1 plate
Open in Bambu Studio
Boost
0
1
0
0
0
0
Released
Description
Content has been automatically translated.
Attached by 2 screws in the holes of the right mast.
In the middle, to allow for play above and below.
2 rings serving as guides, to limit twisting on the PTFE and the hub.
Conceptual Choices
Static
Attaching the hub to a moving part is not perfect: the 2 cables move simultaneously…
One solution is for it to be fixed, and only the output PTFE to be mobile (like the AMS lite, or the classic external spool).
Inverted
The AMS is sometimes placed above the printer: the input PTFE tube therefore comes down “towards the bottom”.
Often, PTFE tubes are attached together, with the power supply: orienting the PTFE downwards therefore limits stress.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)