Dock iPhone MagSafe retro computer Mac Original
Print Profile(1)
Description
Description
A clear nod to the early days of personal computing.
This iPhone stand incorporates the iconic codes of early “all-in-one” computers in a compact format, designed for daily use.
More than a simple dock, it's an object that brings a true visual presence to a desk or nightstand.
The design prioritizes:
* maximum stability
* quick phone placement
* comfortable viewing in landscape mode (StandBy)
Compatible with MagSafe-equipped iPhones, with or without a case depending on its thickness.
⸻
Key points
* Retro computer inspired design
* Perfect for iOS StandBy mode (clock, widgets…)
* Natural access to the phone (quick handling)
* Optimized 3D printing (no unnecessary complexity)
* Decorative + functional object
Highlights:
- PivotTouch® system that allows you to quickly grab the phone “Free your iPhone with one hand, even in the dark”
- modern and sleek design
- good stability on flat surfaces
- quick access to the phone
- compact format for desk or bedside
- simple printing with no assembly
Compatibility:
- MagSafe compatible iPhones.
- compatible with most cases depending on their dimensions.
- iPhones from 12 to 17 standard and Pro are compatible, please feel free to give me feedback if you encounter an issue, as I don't have all phone models available for testing.
- The 3 adapters that clip inside the stand reduce the play between the phone and the case, thus facilitating phone handling. 3 models are available for download with thicknesses of 1.5mm, 2.5mm and 3.5mm.
Note:
This model is a passive stand. It does not integrate a MagSafe charger or electronic components.
FDM printing recommended.
Settings used for the presented model:
- Printer: Bambu Lab H2D
- Nozzle: 0.4 mm
- Layer height: 0.2 mm
- Extrusion width: 0.42 mm
- Material: PLA
- Infill: With a 0.4 mm nozzle, 12 to 15 % infill is recommended
- Supports: necessary
- Support type: standard supports recommended
- Support threshold angle: 30°
- Raft: not used
Orientation:
- Print the model flat on its front face
Recommendations:
- a special support filament or PETG is strongly recommended for overhangs
- Remove supports carefully to preserve the surface finish
- Use a support interface for cleaner overhangs
- Check compatibility with your phone case thickness
- This is a passive stand that does not integrate a charger or electronic component
Amazon link for the MagEase Ø56mm induction charger: https://amzn.eu/d/00OvIgE8
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)