C7 CORVETTE ~ 2-Sided Round Lightbox

All Compatible Lightbox Frames & Mounts Available Here!
 

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues)         Magnets (for optional mounts)

Recommended LED Light Strips     Battery Powered LED Light Strips     Double Sided Tape for Lens: Optional

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

Bring modern American performance styling to your garage, workshop, man cave, showroom, or automotive space with this C7 Corvette-inspired round lightbox. Featuring the iconic crossed flags emblem with a bold illuminated outer ring, this design captures the aggressive styling and unmistakable presence of the seventh-generation Corvette.

Built on the Chopper Originals round lightbox platform, this model is fully interchangeable with your existing mounts and stands, allowing you to swap designs with ease.

Features
• ~224 mm diameter
• ~50 mm total thickness
• 2-sided / double-sided design
• Includes wall-mount brackets
• Hollow bracket arms for hidden wire routing
• LED strip-friendly design
• Clean, even light diffusion

Installation
The included hollow wall-mount brackets allow wiring to be routed internally for a clean installation with no exposed wires visible.

Filaments Used
Bambu Basic PLA – Black
Bambu Basic PLA – Jade White
Bambu Basic PLA – Red
Bambu Basic PLA – Sunflower Yellow

_______________________________________________________________________________________________

Keywords: corvette, c7, chevrolet, chevy, sportscar, musclecar, performance, automotive, garage, racing, americanmade, vette, carculture, mechanic, workshop, showcars

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.