Pulpit Rail Attachment for 20mm flag pole,
Print Profile(1)
Description
First Upload.
I needed to replace the old pulpit rail (the rail that goes around the front of a boat) flag holder on our classic cruiser. So being somewhat new to the world of 3D printing I thought I would design a suitable T joint having failed to find one on the web. If I achieved a successful build then publish it as my first project on Maker World.
So here it is in all its simplistic form, the diameter of the rail bracket is 30.8mm, with the flag support being 20mm.
The two halves of the rail bracket use 4 x 8 x 20mm bolts, washers & nuts.
The chrome rod was a lucky find in the garden shed but for info its 19mm diameter & 32cm in length.
The project was finished off by using two handy project found on Maker World;
https://makerworld.com/en/@3D_KIMBA - Utility Carabiner. - (used the smaller of the two on offer for securing the pennant.)
https://makerworld.com/en/@churchy_85 - Pole Cap & attachment ring for flag. - (resized to fit my 19mm pole).
Thank you guys, 2 very useful prints.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)