Dain Ironfoot on Boar – The Hobbit
Print Profile(1)
Description
"I bow to no elf. Least of all to you, forest sprite."
This figurine reproduces one of the most iconic moments from The Hobbit: The Battle of the Five Armies 🐗⚔️: the King Under the Mountain bursting onto the battlefield atop his armored war beast, war hammer already raised for the strike.
The model consists of two separate pieces, the figure and the scenic base, assembled via integrated alignment pins. Gluing is required to keep the figure in place.
💡 The division was designed to achieve maximum quality on both surfaces: the figure is printed in an optimal position for the details of the cloak, fur, and armor, while the flat base ensures a clean and faithful rock texture.
✅ Designed for fantasy figurine collectors, Tolkien fans, and anyone who wants to add an impactful piece to their bookshelf or desk.
🔹 Compatibility
- 🖨️ Compatible printers: Bambu Lab A1, Bambu Lab P1P, Bambu Lab P1S, Bambu Lab X1C, Bambu Lab X1E
- 🔩 Nozzle tested: 0.4 mm
- 🧩 Modular system: none
🔹 Technical Specifications
- 📐 Base dimensions: 130 × 133 × 21 mm
- 📐 Assembled height: ~150 mm
- 🎨 Material tested: PLA Matte
- 📏 Layer height: 0.2 mm
- 📏 Initial layer height: 0.2 mm
- 🔲 Infill: 10%
- 🔄 Infill pattern: Grid
- 🧱 Wall thickness: 2 perimeters
- 🔝 Top/bottom layers: 5 top · 3 bottom
- 🏗️ Supports: Yes — Tree Auto, 30° threshold, only from build plate
- 🔄 Print orientation: figure tilted on its side; flat base
- 🔀 Available variants: 2 pieces (figure + scenic base), assembled with integrated alignment pins
🔹 Printing Tips
- ⚠️ The figure is printed on its side as per the attached profile. Do not reposition the model: the Tree Auto support profile with a 30° threshold is calibrated for that orientation.
- ⚠️ The alignment pins are generously sized for easy gluing. Gluing is necessary to keep the figure standing on only the two available supports. I recommend glue with a spray activator.
- ✅ Supports are very easily removed starting from the outside with a pair of long-nosed pliers, especially under the cloak and the boar's legs.
Boost Me (for free)
If Dain has earned his place on your desk, leave a 👍 and Boost the project, it's the most direct way to support the work and help other collectors find it. 🐗
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)