Wearable StarWars Inspired Greeble - Rogues

Rogues of Mandalore! Aurebesh for Voth!

Make your own customizable wearable Star Wars Inspired Rogues of Mandalore Greeble. I split this into multiple profiles to be able to make it easy to print the lights on the greeble in what ever color orientation you would want. This will require 3 LEDS for uniformed brightness, one of the LEDs will use the light housing that can be glued in. For the one in the photos I used a 3mm Diode Holder/Mount. You can use whatever you want as long as the threads are <6mm. If you use the same Diode Mount that I did, please be aware that. you may need to cut the end off because of the depth. That was why I included a printable version which can be glued in.

This print is compatible with the back of the other Mandalorian Greeble. They use the same back piece, but the top has a Rogues of Mandalore inspired symbol.

• 18mm Craft Magnets for attaching to clothes

If you want to light it up:

• CR2032 Battery
• CR2032 Lilypad
  • Any of these should work here. They typically sell in sets 5-10 for the cost to buy 2 individually.
  • These are the exact ones I use. HiLetgo 5pcs Lilypad Coin Cell
• OPTIONAL: 3mm diode holder
• 3v LEDs (can be prewired if you dont want to solder) or OPTIONAL: LED filament strips
  • Warning the LED filament strips are VERY fragile. They are really bright and have a ~.18amp draw, but break easily when you are working with them.

Instructions will be uploaded shortly, but a walk through reel will be on my IG, link in profile.