Opel Corsa C Front Strut Bump Stop (Polyurethane)

Opel Corsa C Front Strut Bump Stop (Polyurethane)

Description

This polyurethane bump stop is designed as a replacement for the front suspension strut stop used in the Opel Corsa C and compatible models.

Its purpose is to absorb impacts at the end of suspension travel and protect the shock absorber, strut mount, and surrounding suspension components from excessive loads.

Compared to old, cracked OEM foam bump stops, polyurethane offers significantly improved durability, resistance to oil and moisture, and a much longer service life.

Important Fitment Note

The overall height of the bump stop may need to be adjusted depending on the specific upper strut mount and suspension configuration.

Before printing or installing this part, measure the available distance inside your upper strut mount and adjust the model height accordingly. This ensures proper suspension travel and prevents premature contact.

Disclaimer

This model is provided for personal use and testing purposes only. Installation and use are entirely at your own risk. The author assumes no responsibility for any damage to the vehicle, suspension components, tools, or for any injury resulting from improper installation or use.

Recommended Manufacturing / Print Settings

Material

• Polyurethane (PU)
• For 3D printing, flexible TPU with similar properties may be used

Recommended Hardness

• Shore A 85–90

Layer Height

• 0.20 mm

Walls / Perimeters

• 3–5 walls

Infill

• 40-65%

Print Speed (for TPU)

• Outer wall: 20–30 mm/s
• Inner wall: 30–40 mm/s
• Infill: 30–40 mm/s

Compatible Vehicles

• Opel Corsa C
• Opel Combo C
• Opel Tigra TwinTop
• Vauxhall Corsa C

Suggested Title

Opel Corsa C Front Strut Bump Stop – Custom Height Polyurethane Replacement

Short Description

Durable polyurethane bump stop for Opel Corsa C front suspension. The model height should be adjusted according to the measured distance in your upper strut mount. Use at your own risk.