Titanium TCOMAS Water Cooler Head LX800 Screen Modified USB Monitoring Screen Casing
Print Profile(1)
Description
TCOMAS LX800 Water Cooler Screen Modified USB Monitoring Screen Enclosure
Recently, a TCOMAS LX800 water cooler screen appeared on Taobao and Pinduoduo, which can be modified into a small monitoring screen with a Type-C interface
The control software is TCOMAS's official "TcomasSoftware", available for download from the official website
Total cost approximately 32 yuan, materials needed:
LX800 screen *1 (28 yuan)
4-pin female socket with 5.1k resistor and baffle (2.5 yuan)
PH2.0 ribbon cable 4-pin (0.5 yuan)
M2.5*6 countersunk self-tapping screws *4 (negligible cost)
M2*8 countersunk machine screws *2 and M2 nuts *2 (for fixing the Type-C female socket)
Hot melt glue (a little, for bonding the outer frame and middle layer)
Both the screen mainboard and the Type-C female socket have corresponding interface silkscreen prints; simply solder 5V/D-/D+/GND accordingly
Note that the double-sided adhesive on this screen is quite strong, please disassemble carefully (first pry open the four clips to remove the plastic parts before further disassembly)
(There is also a version for the square LG700 screen on the homepage)
Boost Me (for free)
If this is helpful to you, please give a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)