Mazda MX-5 Miata Adapter Plate for Toyota 1ZZ COP
Print Profile(2)
Description
Mazda MX-5 Miata Adapter Plate for Toyota 1ZZ COP Coils
A 3D-printed adapter plate that lets you convert the Mazda MX-5 Miata ignition system to modern Coil-on-Plug (COP) coils from the Toyota 1ZZ-FE engine. A well-known, budget-friendly upgrade in the Miata tuning and drift community - get rid of old, failure-prone coils and HT leads for good.
Recommended material: I strongly recommend printing this part in Bambu Lab PAHT-CF (or a comparable high-performance carbon-filled nylon). I've been running mine in PAHT-CF for over a month of daily driving with zero signs of wear, deformation or heat damage - it handles the engine bay environment perfectly.
ABS or ASA can work as a budget alternative, but for long-term reliability under heat and vibration, PAHT-CF (or better) is the way to go. I would not recommend PLA or standard PETG for this application.
Print file: A ready-to-print 3MF file with my tested print settings is included - just slice and print.
Installation: The plate replaces the factory coil/plug cover and seats the 1ZZ COP coils directly above the spark plugs. Wiring harness adaptation is required (1ZZ coil pinout). This model requiers you to use M6 Heat inserts.
⚠️ Disclaimer: The engine bay is a hot, vibrating environment. Material choice matters - please use a suitable high-performance filament. Install and drive at your own risk.
If you like the design - please leave a 👍 and share photos of your build!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)