Owl o'clock - wall clock

Owl o'clock 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT
PLEASE NOTE IF YOU GET A WARNING NOTIFICATION FOR FLOATING PLEASE IGNORE SUPPORTS ARE NOT REQUIRED WITH HUEFORGE

You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 1.84mm

    #000000 PLA Sunlu + 2.0 Black  Transmission Distance: 0.1
    #ffffff PLA Sunlu + 2.0 White  Transmission Distance: 6.8
This print uses 2 unique filaments

Swap Instructions:
    Start with Black
    At layer #15 (1.28mm) swap to White for the rest.

For clock hands you can use the MH011 kit or purchase from amazon for a set of parts https://amzn.to/41t5wa4