Print Profile(1)
Description
Boost Me (for free)
Please feel free to boost - I would hugely appreciate it :)
Lets drive this crazy train together!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT
PLEASE NOTE IF YOU GET A WARNING NOTIFICATION FOR FLOATING PLEASE IGNORE SUPPORTS ARE NOT REQUIRED WITH HUEFORGE
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 1.36mm
#000000 PLA Sunlu Matte Black Transmission Distance: 0.1
#ffffff PLA sunlu white Transmission Distance: 6.8
This print uses 2 unique filaments
Swap Instructions:
Start with Sunlu Matte Black
At layer #8 (0.72mm) swap to sunlu white for the rest.
License
Comment & Rating (2)