GMT800 Pocket replacment 52mm gauge pod
Print Profile(1)
Description
This is a gauge pod that removes the pocket under the driver middle vent in the GMT800 cateye silverado's. It may work on other years and models such as the round eye, but i have not confirmed that myself.
This reuses the factory metal clips from the pocket or air bag switch, and you put them onto the print and it snaps in like factory. I used PLA to print this, WITH supports. depending on orientation you may be able to get away without supports and clean up the top of the gauge pod's angled portion. This was a press fit for my gauge so i dont need to use a hold bracket from the back. The gauge i used was an innovate DB gauge, in combo with the LC-2 wideband system. I will be trying it with PETG when it arrives but for now the PLA has been sufficient.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)