Out of the Frame – Venom Breach

• 2026-05-16 Split the print profiles into 100mm and 150mm versions.
• 2026-05-17 Updated both print profiles
  • Minor scaling tweak to ensure the frame size is consistent with the rest of the Out of the Frame series.
  • The frame has been redesigned to prevent excessive supports from forming around the frame. This change will save about an hour of printing time, as no supports are needed in that area.

Out of the Frame – Venom Breach 🖤

Massive Venom violently breaching his ornate frame in the Out of the Frame collection. Huge fanged maw wide open with thick long tongue whipping forward, powerful clawed hands reaching aggressively out while thick symbiote tentacles wrap around the broken edges — pure symbiote fury breaking through reality. Integrated keyhole hanger on the back for easy wall mounting.

Print Profiles

[100mm] 0.12mm layer, 2 walls, 10% infill

• Layer height: 0.12 mm
• Walls: 2
• Infill: 10% Gyroid (infill combination enabled)
• Supports: Tree (auto), on build plate only
• Fuzzy skin (on variant): point distance 0.2 mm, thickness 0.1 mm

Plates / Variants

1. 100 mm 0.12 layer
2. 100 mm 0.12 layer fuzzy skin

[150mm] 0.16mm layer, 2 walls, 5% infill

• Layer height: 0.16mm
• Walls: 2
• Infill: 5% Gyroid (infill combination enabled)
• Supports: Tree (auto), on build plate only
• Fuzzy skin (on variant): point distance 0.2 mm, thickness 0.1 mm

Plates / Variants

1. 150 mm
2. 150 mm fuzzy skin

The rage had a child. And it came out screaming. From the same darkness that created Venom, a more violent and unhinged offspring now tears its way into the world. Carnage Outbreak! Pure symbiote chaos unleashed. Grab it here 👇

Key Printing Tips:

• Disable “Strength → Detect Thin Wall” → gives smoother, cleaner surfaces on detailed parts.
• Always check the slicing preview in Bambu Studio before starting the print.
• Support removal trick: Cut supports into small chunks first, then gently loosen → they usually pop off cleanly without damage.
• Some plates use lots of supports, if so → for reliable prints use these filament settings:
  • Filament Overrides
    • Z Hop When Retract: 0.6 mm
    • Z Hop Type: Spiral
    • Travel Distance Threshold: 1 mm
    • ✅ Enable Retract When Changing Layer
  • Also, disable these settings in Bambu Studio if Variable Layer height is used:
    • Supports
      • ❌ Disable Independent Support Layer Height
    • Others
      • ❌ Disable Reduce Infill Retraction
    • I’ve found that a 0.15 mm top Z distance works best when printing with variable layer height.

Happy printing! Can't wait to see photos of your prints! If you're scaling, experimenting or encounter any issues, let me know → your input helps the next iteration. Please share your feedback for any rating below ⭐⭐⭐⭐⭐ so we can work on improving, thank you!