Anti-gravity Gyroscope V3 (Luminous Edition)

Printing Requirements

Requires one —Standard 030 motor, and three —M2.5x6 pan head machine screws

If you don't have this part, please print this version —Anti-gravity Gyroscope V2

This model requires you to purchase low-power LEDs and light strips separately

The Maker Starter Parts Pack also includes an LED light.

Model Advantages

This model features a self-generating structure, automatically lighting up via the 030 motor when rotated

Due to low power, it can only drive low-power light bulbs and lights up automatically without needing batteries.

The model inherits the main functions of Anti-gravity Gyroscope previous versions, with comparable performance. It can also be played with normally without installing light bulbs.

Model Disadvantages

This model is a semi-finished product. It does not have pre-designed holes for light bulb installation; you need to drill them yourself using Bambu Lab software.

Due to the installed motor, the model's center of gravity is unbalanced vertically, which may result in poorer performance when used horizontally or inverted.

Printing Suggestions

If you need to install lights, please drill holes according to the lights you are using, or use other installation methods

When installing and drilling, please pay attention to weight balance, otherwise it will affect endurance.

It is recommended to use transparent material for the counterweight body for better light transmission

The main body consists of only four parts, which should be self-explanatory, so no installation tutorial will be provided