【Two Ways to Play】Retro Rubber Band Blaster and Soft Dart Blaster (90dB, higher accuracy within 3m)

The final form has been uploaded (recommended). Note that the suppressor's staggered buckle should be inserted all the way and then rotated to lock; directly forcing it in will damage the structure. Plate 2 needs to be printed with TPU. If the V1 version is only used for shooting, TPU is not necessary at all, and applying some petroleum jelly inside the cylinder is quite efficient

Assembly is simple; pay attention to the assembly order. A small amount of glue is needed to attach the piston and the launch tube; after inserting the (piston and launch tube assembly) into the barrel, then slot the barrel and the gun body into the dovetail joint and glue them firmly. The latest revised version adds a cylinder reinforcement structure (slightly different from previously uploaded images); the newly added structure needs to be firmly glued to the outer wall of the cylinder. This will give the toy a long lifespan

↑↑↑You can use a small piece of filament, soften one end with a lighter and flatten it into a nail shape, then glue it into the reserved hole in the barrel. This is used to secure the TPU part. Next, you can put on the rubber band and start showcasing

When installing the suppressor, you can use soft darts; it is recommended to use soft darts around 36mm in length. For power, use no more than 3 black rubber bands; more will damage the overall structure

!!! Special safety warning regarding use !!! Using this toy is at your own risk !!! Children must use the toy under adult supervision; although the power is far less than the 0.16j/cm2 limit, please do not shoot at people or animals