Outdoor Market Sign Holder

I created this very simple sign holder for outdoor vendor / craft fair markets to display your logos and any other information you may want on your tents. The sign has cutouts in the wall for magnets to go inside which will be linked below. I will also link a video of how strong the magnets are so that you know they will hold up. I will also link to the S hooks I used so that you can use them if you choose or pick something more suited to your liking. 

The 3mf file has the Torus laid out at 120mm spacing which worked out for us and our sizing. When you make your sign, space out your holes 120mm and you will be just fine. If you want a little more customization, you can use the STL file that still has the slot for the magnets but no Torus slot in it to customize how you like it. I also made the top piece larger as I know some people like to add writing there.

I printed the model in PETG-GF to withstand the hot summer days with a sign hanging off of it. I would suggest the same. The pause is already in the file. Just in case anything happens once you download the file, here's the info: 

Pause is at layer 182 as long as you are printing with a 0.4mm nozzle at 0.2mm layer height and don't make any other adjustments to your layers. 

Torus' are preset to 100% infill to withstand any weight hanging from them. 

The bracket is set to 30% Gyroid Infill with 3 walls.

Here are the links to everything I used: 

PETG-GF Filament - https://amzn.to/4dzuIvL

S Hooks - https://amzn.to/42r0ZPA

Cup Magnets -  https://amzn.to/4df7WYH

TikTok Video Example of it working - https://www.tiktok.com/@3d4u7/video/7638305464152853791?is_from_webapp=1&sender_device=pc&web_id=7596449392422520375