Print Profile(2)
Description
The pop-up sprinkler is intended for burying (the pictures and video, of course, do not yet show it in the intended installation position ;-))
The sprinkler automatically extends upwards when the water is turned on. After being turned off, it must be manually pushed back down as no spring is installed
All components are included on the print plate, with spray nozzles for 90°, 180°, 270°, and 360° spray angles, as well as connectors for attaching a hose coupling or a hose with a 16 mm inner diameter
Printing should be done with a calibrated printer using high quality settings to ensure optimal function. It would also be optimal to sand down the seam on the riser pipe. It will then extend even more easily
A slightly better spray pattern is achieved when printing with a 0.2 mm nozzle
Required accessories
- O-ring seal size R-20 (inner diameter 26.5 mm x thickness 3.55 mm)
Assembly
- Screw component 1 onto the thread of component 2, wrapped with sealing tape
- Insert the seal into the groove between component 1 and 2
- Slide component 3 in from above, slide component 4 in from below, and screw them together by rotating component 3
- Wrap component 5 with sealing tape and screw it into component 2
- Screw the desired nozzle attachment 6 into component 3
Finally, wrap the desired connector with sealing tape and screw it into component 2
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)