BUC-EE’S ~ 2-Sided Round Lightbox

All Compatible Lightbox Frames & Mounts Available Here!
 

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues)         Magnets (for optional mounts)

Recommended LED Light Strips     Battery Powered LED Light Strips     Double Sided Tape for Lens: Optional

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

***NOTICE*** I had to turn off the prime tower to get this file to upload with MW. On the P1S it does not interfere when turned on. Therefore, you will need to turn it back on before printing and if not using the P1S, position it for best results in your slicer. Photos included showing how to turn it on.

Bring roadside nostalgia and travel-stop charm to your garage, kitchen, game room, camper, shop, or man cave with this Buc-ee’s-inspired round lightbox. Featuring the iconic beaver mascot with bold vibrant colors, this illuminated sign adds a fun and recognizable centerpiece to any space.

Built on the same trusted Chopper Originals round lightbox platform, designed for a clean, professional finish when illuminated.

Features:
• ~224 mm diameter
• ~50 mm total thickness
• Double-sided design (visible from both directions)
• Includes wall-mount brackets
• Hollow bracket arms for hidden LED wire routing
• Designed for LED strip lighting
• Clean, even light diffusion

Installation:
The hollow wall-mount brackets allow for concealed wire routing through the arms for a clean, professional install. A hole-jig on plate 4 is included to simplify mounting.

Filaments Used:
Bambu Basic PLA – Black
Bambu Basic PLA – Sunflower Yellow
Bambu Basic PLA – Red
Bambu Basic PLA – Brown
Bambu Basic PLA – Jade White

_______________________________________________________________________________________________

keywords: buccees, beaver, travel, gasstation, roadside, texas, convenience, mascot, roadtrip, snackshop, travelcenter, neon, mancave, garage, americana

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.