Table adapter for water dispenser
Print Profile(1)
Description
Hello everyone!
Since I couldn't find a suitable adapter, I quickly designed one myself.
This is an adapter for stable mounting of a water dispenser on a tabletop.
The adapter fits the KitchenBoss model precisely and engages with the dispenser's receptacle along its full length.
This ensures everything stays secure and doesn't slip, even with strong movements or vibrations – ideal for camping or RVs, for example.
The adapter has an outer diameter of 59 mm and a hose guide with a 22 mm diameter.
Gluing or screwing the dispenser to the adapter is not necessary. This allows the water dispenser to be easily removed for cleaning or charging at any time.
For fastening, there are two countersunk holes so that the screw heads disappear neatly into the adapter.
M5 hex socket screws (DIN 912) are used.
The required screw length depends on the respective plate thickness.
I used M5x40 mm hex socket screws.
This allows the adapter, including washers and self-locking nuts,
to be easily mounted on tabletops up to approximately 15 mm thick.
The model was printed from Nobufil PETG.
If you have any questions or suggestions for improvement, feel free to write to me :)
Best regards
OJ
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)