2WD RC Chassis V2 for Tamiya Mini 4WD GRASSHOPPER
Print Profile(1)
Bill of Materials
- Please check the NPP list for the other parts. x 1:
Description
2WD RC Chassis for Tamiya Mini 4WD 1/32 GRASSHOPPER Jr. - Version 2
This project is designed to give your Tamiya Mini 4WD GRASSHOPPER Jr. a second life as a fully proportional, radio-controlled car. By combining 3D-printed precision with standard micro RC electronics, you’ll transform a track-bound Mini 4WD model into a nimble Mini 2WD racer. The printed parts are easy to assemble – just screw them together. Some ESC´s like DasMikro must be soldered. Some batterys like these with walkera plug can be directly connected with the receiver, otherwise a battery connection cable must be crimped or soldered. If you can't crimp or solder yourself, perhaps you know someone who can help you with this. If you do not have ball bearings (2 x 6 x 2.5 mm) or springs, you can use the printable parts instead.
If you have already built the first version of the RC chassis for the Grasshopper, then look forward to this second version!
The assembly instructions can be found in the Build Guide and the links for the non-printable parts you need are listed in the NPP-list.
Boost Me (for free)
I hope you like it! Do you want more Mini RC Chassis?
Documentation (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)