catwoman stealth pose- high detail display statue

This is a Catwoman figurine in a dynamic pose, designed for model and collecting enthusiasts. The model is optimized to capture the details of the suit and the character's expression even at reduced sizes.
Recommended print specifications (as per photo):
Height: 10 cm.
Material: PLA Basic (White).
Layer height: 0.16 mm (for an excellent balance between speed and definition).
Speed: A reduced speed is recommended to ensure the precision of finer details and better layer adhesion.
Notes for the Maker (Post-Production)
The model was conceived as a base for a complete artistic project. To achieve the best aesthetic result, keep the following in mind:
Post-Production: The model requires light support removal and fine sandpaper (400-600 grit) to smooth surfaces before finishing.
Coloring: Printing in white PLA serves as an excellent base. It is recommended to apply a spray primer (filler) to completely hide layer lines, followed by hand painting or airbrushing. It is perfect for customization with the classic glossy black or dark gray tones typical of the character.

Note on settings: The included print profile is already configured with reduced speeds and a layer height of 0.16 mm. I have personally tested these settings to ensure that the details of the mask and suit are defined and ready for the painting phase.