Table Tennis Net Holder

Transform any board or table into a table tennis table wherever you want, whether outdoors in a park on a table or indoors during bad weather. With this mounting device, you'll have a playable table tennis table with a dividing net in no time. Almost everything is 3D printed except for 2 M6 screws and the string or ribbon / tape, depending on whether you want to use YOUR Method 1 or 2.

I designed it so that there are several ways to install a net or divider.

Method 1:

1. 

   For example, with ribbon and the printed clips. 

   I used 25mm wide ribbon. 

   The clips are inserted so that the ribbon 

   forms a loop which is then placed over the bolt 

   with 3 ribbons stacked, the net is complete, and you can slide the sleeve over it to secure the ribbons.

    

   Alternatively, you could simply use adhesive tape / masking tape. For the method mentioned here, you do NOT need to print the second print plate.

Method 2;

2. Print the second print plate and thread a string through the holes in the plates, then tie it securely in the notches on the bolt. Make sure the string is well-tensioned.