Search models, users, collections, and posts
Customizable Pergola Post Base — Parametric
IP Report
This model is created by Parametric Model Maker
Make Your Model
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
4.2 h
1 plate
Open in Bambu Studio
Boost
4
19
0
0
8
2
Released
Description
A fully parametric mounting base for pergola, gazebo and fence posts.
Click Customize to adjust dimensions, hole pattern and chamfer to your build.
Default specs
- 160 × 160 × 50 mm footprint
- 8 mm corner radius
- 3 × Ø11 mm through-holes for M10 bolt anchors (L-pattern, 130 mm hole spacing)
- ~1.35 kg in ASA at 100 % infill (lighter with sensible infill)
Customizer parameters
| Group | Parameter | Default | Range |
|---|---|---|---|
| Dimensions | Width / Depth | 160 mm | 40–400 |
| Dimensions | Height | 50 mm | 5–200 |
| Dimensions | Corner radius | 8 mm | 0–30 |
| Top edge | Chamfer | 0 mm | 0–30 |
| Holes | Diameter | 11 mm | 0–30 |
| Holes | Edge distance | 15 mm | 5–60 |
| Holes | Layout | L (3 holes) | L / 4 / none |
Recommended print settings
- Filament: ASA (UV-stable, outdoor-grade) — Black or Anthracite
- Layer height: 0.20 mm
- Walls: 4 perimeters, 30 % gyroid infill
- Bed: 100 °C, Engineering Plate + glue, brim 5 mm
- Chamber: active heating recommended (Bambu H2C / X1C / P1S enclosed)
- Fuzzy Skin: External walls only, distance 0.6 mm, thickness 0.25 mm
— gives a powder-coated metal look that matches typical anthracite RAL 7016 hardware
Notes
- Designed for static/decorative use under standard pergola posts. For load-bearing
applications (high wind exposure, large spans), confirm structural adequacy or
use over a metal anchor as a cover. - Hole pattern is asymmetric (L-shape) by design — fits standard 3-bolt
anchor plates. Switch to 4-hole layout in customizer if needed.
Source .scad included — open in OpenSCAD or via the Customize button above.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (0)